Location; Device Maintenance; Configuration Management - Ubiquiti airFiber AF-5X User Manual

airFiber ® AF-5X User Guide

Location

After the on-board GPS determines the location of the
AF-5X, its latitude and longitude are displayed. If the GPS
does not have a fix on its location, then "Searching for
Satellites" will be displayed.
Latitude The latitude of the AF-5X's location is displayed.
Longitude The longitude of the AF-5X's location is
displayed.

Device Maintenance

The controls in this section manage the AF-5X
maintenance routines: reboot and support information
reports.
Reboot Device Initiates a full reboot cycle of the AF-5X.
Reboot is the same as the hardware reboot, which is
similar to the power-off and power-on cycle. The system
configuration stays the same after the reboot cycle
completes. Any changes that have not been applied are
lost.
Support Info This generates a support information
file that the Ubiquiti support engineers can use when
providing customer support. This file only needs to be
generated at their request.

Configuration Management

The controls in this section manage the AF-5X
configuration routines and the option to reset the AF-5X
to factory default settings.
The AF-5X configuration is stored in a plain text file (.cfg
file). You can back up, restore, or update the system
configuration file:
Back Up Configuration Click Download to download the
current system configuration file.
Upload Configuration Click Choose File to locate the
new configuration file. Select the file and click Open.
We recommend that you back up your current system
configuration before uploading the new configuration.
Ubiquiti Networks, Inc.
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Upload Click this button to upload the new configuration
file to the AF-5X. Click Apply to confirm.
After the AF-5X reboots, the settings of the new
configuration are displayed in the Wireless, Network,
Advanced, Services, and System tabs of the airFiber
Configuration Interface.
Reset to Factory Defaults
default settings. This option will reboot the AF-5X, and all
factory default settings will be restored. We recommend
that you back up your current system configuration before
resetting the AF-5X to its defaults.
Chapter 9: System Tab
Resets the AF-5X to the factory
29