Ethernet; Monitor - Ubiquiti airFiber AF-5X User Manual

airFiber ® AF-5X User Guide
Remote TX Power (EIRP)
transmit output power (in dBm) of the remote AF-5X.
Distance Displays the distance between the airFiber
radios.
GPS Signal Quality Displays Global Positioning System
(GPS) signal quality as a percentage value on a scale of
0-100%.
Latitude/Longitude Based on GPS tracking, reports the
device's current latitude and longitude. Clicking the link
opens the reported latitude and longitude in a browser
using Google Maps (http://maps.google.com).
™
Altitude Based on GPS tracking, reports the device's
current altitude relative to sea level.
Synchronization
airFiber uses GPS to synchronize the
timing of its transmissions. By default, this option is
disabled.

Ethernet

MGMT MAC Displays the MAC address of the
Management port.
MGMT Displays the speed and duplex of the Management
port.
DATA Displays the speed and duplex of the Data port.
DATA Cable Length Displays the Ethernet cable length
from radio to remote port. This is displayed only for cables
longer than 20 m.
DATA Pair 0 (Pins 1,2) If the cable is functioning properly,
displays the SNR of the twisted pair; if the cable has a
fault, displays the fault ("open" or "short") and the distance
at which the fault has occurred. If the remote port is
administratively shut down, this field displays "normal" .
DATA Pair 1 (Pins 3,6) If the cable is functioning properly,
displays the SNR of the twisted pair; if the cable has a
fault, displays the fault ("open" or "short") and the distance
at which the fault has occurred. If the remote port is
administratively shut down, this field displays "normal" .
DATA Pair 2 (Pins 4,5) If the cable is functioning properly,
displays the SNR of the twisted pair; if the cable has a
fault, displays the fault ("open" or "short") and the distance
at which the fault has occurred. If the remote port is
administratively shut down, this field displays "normal" .
DATA Pair 3 (Pins 7,8) If the cable is functioning properly,
displays the SNR of the twisted pair; if the cable has a
fault, displays the fault ("open" or "short") and the distance
at which the fault has occurred. If the remote port is
administratively shut down, this field displays "normal" .
Ubiquiti Networks, Inc.
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Displays the current average

Monitor

There are two monitoring tools accessible via the links
on the Main tab. The default is Performance, which is
displayed when you first open the Main tab.
Performance
Throughput and Capacity charts display the current and
potential data traffic.
Throughput
Throughput displays the current data traffic on the Data
port in both graphical and numerical form. The chart scale
and throughput dimension (Bps, Kbps, Mbps) change
dynamically depending on the mean throughput value.
The statistics are updated automatically.
Capacity
Capacity displays the potential data traffic on the Data
port in both graphical and numerical form. The chart scale
and throughput dimension (Bps, Kbps, Mbps) change
dynamically depending on the mean throughput value.
The statistics are updated automatically.
Refresh If there is a delay in the automatic update, click
Refresh to manually update the statistics.
Log
When logging is enabled (see "System Log" on page
26 to enable logging), this option lists all registered
system events. By default, logging is not enabled.
Clear To delete all entries in the system log, click Clear.
Refresh To update the log content, click Refresh.
Chapter 4: Main Tab
15