Chapter 9: System Tab; Firmware Update - Ubiquiti airFiber AF-5X User Manual

airFiber ® AF-5X User Guide

Chapter 9: System Tab

The System tab contains administrative options. This
page enables the administrator to reboot the AF-5X, reset
it to factory defaults, upload new firmware, back up or
update the configuration, and configure the administrator
account.
Change To save or test your changes, click Change.
A new message appears. You have three options:
• Apply To immediately save your changes, click Apply.
• Test To try the changes without saving them, click
Test. To keep the changes, click Apply. If you do not
click Apply within 180 seconds (the countdown is
displayed), the AF-5X times out and resumes its earlier
configuration.
• Discard To cancel your changes, click Discard.
Ubiquiti Networks, Inc.
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Firmware Update

The controls in this section manage firmware
maintenance.
Firmware Version Displays the current firmware version.
Build Number
Displays the build number of the firmware
version.
Check for Updates By default, the firmware automatically
checks for updates. To manually check for an update, click
Check Now.
Upload Firmware Click this button to update the AF-5X
with new firmware.
The AF-5X firmware update is compatible with all
configuration settings. The system configuration is
preserved while the AF-5X is updated with a new firmware
version. However, we recommend that you back up
your current system configuration before updating the
firmware.
Chapter 9: System Tab
27