Ubiquiti airFiber AF-5X User Manual page 11

airFiber ® AF-5X User Guide
Mount the External GPS Antenna
Locate a mounting point that has a clear view to the sky,
and is above and as far away as possible from the AF-5X.
1. Attach the GPS Antenna Mount to the pole using the
metal strap, or attach it to a wall using the appropriate
fasteners (not included).
2. Place the External GPS Antenna on the mount.
3. Secure the cable of the External GPS Antenna to the
mount with a Cable Tie.
Ubiquiti Networks, Inc.
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Connecting Power over Ethernet
1. Lift the release latch on the bottom of the AF-5X and
slide the Port Cover off.
2. Connect an outdoor, shielded Ethernet cable to the
DATA port.
3. Connect the other end of the cable from the DATA port
to the Ethernet port labeled POE on the airFiber PoE
Adapter.
WARNING: Use only the included airFiber PoE
adapter, Model: GP-H240-100G-4. Failure to do
so can damage the unit and void the product
warranty.
Chapter 2: Installation
7