Printer Does Not Turn On - Kodak 8500 User Manual

8500 Printer does not turn on

Possible Cause
The power is not on.
The cables and the power cord are not
connected securely.
Printing takes much longer than usual
Possible Cause
The image file size may be larger than
usual and, therefore, takes longer to
process.
The 8500 printer is too warm.
(The Error light blinks in green.)
CONTENTS PRINTER DRIVER GUIDE
Possible Solution
Check that the power switch is pressed
securely.
Check that the cables and the power
cord are connected securely.
Possible Solution
Wait a few minutes.
1. Wait for a while until the temperature
inside the 8500 printer falls.
2. If the temperature does not fall, turn
the 8500 printer off. Consider moving
the 8500 printer to a location where
the temperature is lower.
SEARCH
Introduction
Setting up the 8500
Printer
Operating the 8500
Printer
Troubleshooting
Site Specifications
Accessories and
Supplies
HELP