Repacking The Printer - Kodak 8500 User Manual

Repacking the Printer

If you need to ship the printer, pack it as follows:
1. Remove the paper from the paper tray.
2. Open the top cover. Then remove the ribbon cartridge. Discard
the ribbon, or store it in its original box. Put the ink carrier in its
original packing.
3. Close the top cover.
4. Attach the shipping inserts on both sides of the paper tray
inserting slot.
5. Put the 8500 printer in its original plastic sheet to keep it clean
during shipping.
6. Pack the printer in its original box.
7. Replace the top foam cap.
CONTENTS PRINTER DRIVER GUIDE SEARCH HELP
Introduction
Setting up the 8500
Printer
Operating the 8500
Printer
Troubleshooting
Site Specifications
Accessories and
Supplies