SAGEMCOM D790 User Manual page 44

Resetting the base
When you reset your base, all the settings are returned to their initial
values (factory settings), except for the phonebook.
Menu > SETTINGS
1 Enter the base code and confirm.
Note The default code is 0000.
2 Follow the instructions on the screen and confirm.
Removing a handset registered on the base
Menu > SETTINGS
DELETE HANDSET.
1 Enter the base code and confirm.
Note The default code is 0000.
2 Select the handset number and confirm.
Renaming the base
You can assign a meaningful name to your base if you have several bases.
Menu > SETTINGS
Follow the instructions on the screen and confirm.
> ADVANCED SET.
> ADVANCED SET.
> ADVANCED SET.
> SET BASE > RESET BASE
>
> SET BASE > RENAME BASE
SET BASE >
43