The Base - SAGEMCOM D790 User Manual

The base

Enabling the pairing mode
The pairing mode needs to be enabled to pair an additional handset with
your D790 base.
You can either do this by pressing the button on the back of the base for
more than 4 seconds.
Or
you can use the handset Menu to activate it:
Menu > SETTINGS
Your base will now remain in pairing mode for approximately a minute.
Please consult page 7 for more information about the base unit.
Note Your base will remain in pairing mode for about a minute.
42
> ADVANCED SET.
Long press:
> 4 seconds
> SET BASE > REGISTR.MODE
Setting up...