SAGEMCOM D790 User Manual page 39

Enabling/Disabling keypad locking
This function lets you lock the keypad when you are not calling.
(1 long press)
Menu > SETTINGS
Follow the instructions on the screen and confirm.
Note To unlock the keypad keep
Changing the default code
The base code is required to access certain security functions (banned
calls, reinitialising the base, etc.).
Menu > SETTINGS
Enter the old and then the new code and confirm.
Allow/Prevent the sharing of a call with another
handset
Note If you disable the intrusion mode, you will not be able to
share a call in progress with another handset (refer to
paragraph
Menu > SETTINGS
Follow the instructions on the screen and confirm.
38
> KEYPAD LOCK
> ADVANCED SET.
"Intrusion", page
> ADVANCED SET.
pressed for a few seconds.
> CHANGE CODE
25).
> SET BASE > INTRUSION
Setting up...