Setting Up The Handset - SAGEMCOM D790 User Manual

Setting up the handset

1
1 Connect the power adapter of the charger to the mains socket.
2 The batteries are already inserted in the handset. To start using your
handset, simply remove the plastic tab by pulling on it firmly in the
direction of the arrow.
3 The screen will turn on.
4 An information screen presents the current language used.
5 Select the language using  or  keys. Press OK.
6 An information screen asks you to choose the country where you will use
your telephone.
7 Select the country using  or  keys. Press OK.
8 Place your handset on its charger and fully charge the batteries for at least
15 hours prior to the initial use.
A beep sounds when you place the handset on the charger.
The battery charging icon
progress. The icon will stop moving when the batteries are fully charged.
Note By default, the handset is registered on the base.
If your handset is not recognized by the base, launch manual
recognition
D790 base ", page
10
2
1
moves to inform you that charging is in
(refer to the section "Associating a new handset to
39).
3
HD
13/12 -1- 14:05
15 H
HD
13/12 -1- 14:05
HD
13/12 -1- 14:05
Discover...