Connecting Using The S-Video Output; Connecting Using The Component Video; Output - Pioneer DV-300-K Operating Instructions Manual

02
Connections
Connecting using the S-video

output

If your TV (or other equipment) has an S-video
(S1) input, you can use the S-video output on
this player instead of the standard (composite)
output for a better quality picture.
• Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV (or monitor or AV
receiver).
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
TV
P
B
COAXIAL
P
S-VIDEO R
DIGITAL AUDIO OUT OUT COMPONENT VIDEO OUT
12
En
To S-video input
VIDEO OUT AUDIO OUT
L
R
Y
Connecting using the
component video output
You can use the component video output
instead of the standard video out jack to
connect this player to your TV (or other
equipment). This should give you the best
quality picture from the three types of video
output available.
TV
VIDEO OUT AUDIO OUT
P
B
COAXIAL
P Y
S-VIDEO R
DIGITAL AUDIO OUT OUT COMPONENT VIDEO OUT
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor or AV receiver.
To component
video input
L
R