LanParty Blood-Iron G41-T33 User Manual page 88

3
BIOS Setup
Auto Save Bootable Setting
This field is used to automatically save the last bootable setting from CMOS to an
area in the SEEPROM referred to as the backup bank. To use this function:
1. Set this field to Enabled.
2. Select "Save & Exit Setup" in the main menu then press <Enter>.
3. Type <Y> then press <Enter>.
If the changes to the setting allowed the system to boot, the setting will be
stored in the SEEPROM. In other words, if the system did not boot up, the set-
ting will not be stored. You may then follow the steps in the next section to load
the last bootable setting.
Load Last Bootable Setting
If, during the trial and error process, the setting resulted to the system's instabil-
ity or worse yet, not being able to boot up the system, please follow the steps
below to use the Load function.
Note:
You can use the Load function only if you have set the "Auto Save Boot-
able Setting" to Enabled.
1. If the system did not boot up properly but you were able to enter the BIOS
utility:
a. Select "CMOS Reloaded" in the main menu then press <Enter>.
b. Move the cursor to "Load Last Bootable Setting" then press "Load".
c. Press <Y> to load the last bootable setting that was stored in the backup
bank.
2. If you cannot enter the BIOS utility:
a. Use the Clear CMOS jumper to clear the CMOS. Refer to chapter 2 for
more information about clearing CMOS.
b. Enter the BIOS utility then perform steps 1a to 1c.
Saving, Loading and Naming BIOS Settings
For overclockers who require different sets of settings for various system environ-
ments or operating systems, CMOS Reloaded allows you to save, load and name
up to four sets of BIOS settings - in the "User Defined Setting Bank #1" to "User
Defined Setting Bank #4" fields.
Save Setting to Bank With
This field is used to select the type of setting you would like saved to a User De-
fined Setting Bank when you use the "Save to this Bank" function of that bank.
Current BIOS Setting
This option will save the current BIOS setting to the User Defined Setting
Bank.
Last BIOS Setting
This option will save the last saved BIOS setting to the User Defined Setting
Bank.
88