Table of Contents
Advertisement
3
BIOS Setup
DRAM Timing
Move the cursor to this field and press <Enter>. The following screen will appear.
DRAM Speed
CAS Latency Time (tCL)
RAS# to CAS# Delay (tRCD)
RAS# Precharge (tRP)
: Move
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be identical to
this one.
DRAM Speed
This field is used to select the clock speed of the DIMM.
CAS Latency Time (tCL)
This field is used to select the clock cycle of the CAS latency time. The op-
tion selected specifies the timing delay before SDRAM starts a read command
after receiving it.
RAS# to CAS# Delay (tRCD)
This field is used to select the RAS# to CAS# delay time when reading and
writing to the same bank.
RAS# Precharge (tRP)
This field is used to select the idle clocks after issuing a precharge command
to the DRAM.
86
Phoenix - AwardBIOS CMOS Setup Utility
DRAM Timing
Auto
Auto
Auto
Auto
Enter: Select
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Item Help
Menu Level
F10: Save
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
