2
Hardware Installation
S/PDIF-Out Connector
Parallel
SPDIF out
Key
Ground
+5V
N. C.
1
5
The S/PDIF-out connector is used to connect an external S/PDIF-out port. Your
S/PDIF port may be mounted on a card-edge bracket. Install the card-edge
bracket to an available slot at the rear of the system chassis then connect the
audio cable to the S/PDIF-out connector. Make sure pin 1 of the audio cable is
aligned with pin 1 of the S/PDIF-out connector.
38