Table of Contents
Advertisement
PnP/PCI Configurations
This section shows how to configure the PCI bus system. It covers some very
technical items and it is strongly recommended that only experienced users
should make any changes to the default settings.
Init Display First
Reset Configuration Data
Resources Controlled By
x IRQ Resources
PCI/VGA Palette Snoop
** PCI Express Relative Items **
Maximum Payload Size
: Move
Enter: Select
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be identical to
this one.
Init Display First
Onboard
When the system boots, it will first initialize the onboard VGA.
PCI Slot
When the system boots, it will first initialize PCI.
Reset Configuration Data
Enabled
The BIOS will reset the Extended System Configuration Data (ESCD) once
automatically. It will then recreate a new set of configuration data.
Disabled
The BIOS will not reset the configuration data.
Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically configure all of
the boot and Plug and Play compatible devices.
Auto(ESCD)
The system will automatically detect the settings for you.
Manual
Choose the specific IRQ resources in the "IRQ Resources" field.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
PCI Slot
Disabled
Auto(ESCD)
Press Enter
Disabled
128
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
BIOS Setup
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
3
77
Advertisement
Table of Contents
