Troubleshooting - Akai ACAC105UC User Manual

7.

Troubleshooting

Trouble
No power.
Disc cannot be loaded.
Disc cannot be read.
No sound.
The operation keys
do not work.
Sound skips.
The radio does not work.
The radio station automatic
selection does not work.
MP3 playback
Trouble
No sound or incomplete audio
20
Action
The car ignition is not on. If the power supply is
properly connected to the car accessory, switch the
ignition key to "ACC".
The fuse is blown. Replace the fuse.
Presence of disc inside the player. Remove the disc in
the player, then insert the new disc.
Disc inserted upside down. Insert the disc with the label
facing upward.
Disc is extremely dirty or defective. Clean the disc or try
to play a new one.
Temperature inside the car is too high. Cool down until
the ambient temperature has returned to normal.
Volume is at minimum level. Adjust volume to the
desired level.
Wiring is not properly connected. Check wiring
connections.
Internal error. Reset the appliance.
Front panel is not properly fixed into its place. Install the
front panel properly.
The installation angle is more than 20°. Adjust the
installation angle to less than 20°.
The disc is extremely dirty or defective. Clean the disc
or try to play a new one.
The antenna cable is not connected. Insert the antenna
cable firmly.
The signals are too weak. Select a station manually.
Action
If MP3 data is mixed with other files on CD, the
appliance may play the non-MP3 files as noise or
without sound or it rejects the disc.
Check if the played file is in MP3 format or select
another file to play.