Cd Functions - Akai ACAC105UC User Manual

- The volume level will be increased to the threshold value if it was under
the threshold value
5.4

CD functions

● To insert a disc:
- Press the OPEN PANEL button (21) and wait for the control panel to
move out of the way.
- Insert the disc into the slot (28) with the label upwards.
- Flip the control panel upwards.
Playback will start automatically. During playback, the following functions are
available:
● To select a track, press the PREV button (15) or the NEXT button (16)
until the desired track is set.
● To search for a specific point on the disc, hold the PREV button (15) or the
NEXT button (16) until the point is reached and release the button.
● To pause playback, press the PAU button (9) once; to resume playback,
press the button again.
● To play the first 10 seconds of each track on the disc, press the INT button
(10). The display shows the message "INT ON". Press the button again to
cancel the function.
● Press the RPT button (11) once to repeat the current track. The display
shows the message "RPT ON". Press the button again to cancel the
function.
● Press the RDM button (12) to play all tracks in random order. The display
shows the message "RDM ON". Press the button again to cancel the
function.
● To show extra information about a disc (track time, specific track), press
the DISP button (4).
MP3/WMA playback
● To scroll through the track list, by 10 tracks down or 10 tracks up, press
the TRACK SEARCH - button (13) or the TRACK SEARCH + button (14).
14