Canon MX920 series Online Manual page 171

If you load the original in the ADF, do not move the original until copying is complete.
To cancel copying, press the Stop button.
If you load the original on the platen glass, you can add the copying job while printing.
Adding the Copying Job (Reserve copy)
If you load the original on the platen glass, you can add the copying job while printing (Reserve copy).
The screen below is displayed when you can add the copying job.
Load the original on the platen glass and press the same button (the Color button or the Black
button) as the one which you previously pressed.
Important
When you load the original on the platen glass, move the document cover gently.
Note
When Print qlty (print quality) is set High, or you load the original in the ADF, you cannot add
the copying job.
When you add the copying job, the number of copies or the settings such as the page size or
media type cannot be changed.
If you press the Stop button while reserve copying is in progress, the screen to select the
method to cancel copying is displayed. If you select Cancel all reservations then press the OK
button, you can cancel copying all scanned data. If you select Cancel the last reservation, then
press the OK button, you can cancel the last copying job.
If you set a document of too many pages to add the copying job, Cannot add more copy jobs.
Please wait a while and redo the operation. may appear on the LCD. Press the OK button and
wait a while, then try copying again.
If Failed to reserve the copy job. Start over from the beginning. appears on the LCD when
scanning, press the OK button, then press the Stop button to cancel copying. After that, copy the
documents that have not been finished copying.
Downloaded from ManualsPrinter.com Manuals
Note
Adding the Copying Job (Reserve copy)