Canon MX920 series Online Manual page 135

Settings on the Machine
You can change the PictBridge print settings from the PictBridge print settings screen. Set the print
settings to Default on the PictBridge compliant device when you want to print according to the settings on
the machine.
This section describes the procedure to display the PictBridge print settings screen.
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Press the MENU button.
The menu screen is displayed.
3. Select
4. Select
5. Use the
6. Check the message that is displayed, then press the OK button.
The PictBridge print settings screen is displayed.
For details on the setting items:
PictBridge print settings
Note
If you select Disc label print setting, the Set disc print area screen is displayed to change the
disc label print setting.
PictBridge print settings
Downloaded from ManualsPrinter.com Manuals
Setup, then press the OK button.
Device settings, then press the OK button.
button to select PictBridge print settings, then press the OK button.