Installing The Display Hinges - Dell NOT22366 Owner's Manual

Installing the display hinges

CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE: This procedure applies only to computers with a plastic chassis.
The following images indicate the location of the display hinges and provide a visual representation of the installation procedure.
Steps
1. Align and place the left display hinge on the display assembly.
2. Replace the three screws (M2.5x3.8) to secure the left display hinge to the display panel and back cover.
3. Align and place the right display hinge on the display assembly.
4. Replace the three screws (M2.5x3.8) to secure the right display hinge to the display panel and back cover.
92 Removing and installing Field Replaceable Units (FRUs)