Sony XAV-62BT Operating Instructions Manual page 80

Precautions
• Choose the installation location carefully so that the
unit will not interfere with normal driving operations.
• Avoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperature, such as in
direct sunlight or near heater ducts.
• Use only the supplied mounting hardware for a safe and
secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Connecting the parking brake
lead
@]
Be sure to connect the parking brake lead (light green) of
the power supply connection cable
CD
to the parking
brake switch cord. The mounting position of the parking
brake switch cord depends on your car. Consult your car
dealer or your nearest Sony dealer for further details.
Installing the microphone
(XAV-62BT only) [[]
Mounting the unit
ffiJ
m-A
Mounting the unit with an
installation kit (not supplied)
You can use a commercially available double DIN
installation kit. Choose an installation kit with the
follOWing panel frame size.
Larger than 172 x 97 mm (6
7 / 8
x 3
7/,
in) (w/h), with an
inner corner radius ofless than 0.5 mm (1/32 in).
Notes
• Be sure
to
use the supplied screws
0.
• Before installing the unit with the installation kit mounted, be sure to
perform the following confirmation:
Power the unit on, and open/close the front panel by pressing
~
repeatedly to check that the front panel does not touch the
installation kir.
m-B
Mounting the unit in a Japanese car
You may be able to install this unit in some makes of
Japanese cars without an installation kit (not supplied). If
you cannot, consult your Sony dealer.
When mounting this unit to the preinstalled brackets of
your car, use the supplied screws
®
in the appropriate
screw holes, based on your car: T for TOYOTA, M for
MITSUBISHI and N for NISSAN.
Warning
if
your car's ignition
has no ACC position
Notes
• To avoid a malfunction, install only with the supplied screws
0.
• Do not apply excessive force to the buttons of the unir.
• Do not press on the LCD.
• Before mounting, make sure there is nothing on the top of the unit.
To capture your voice during handsfree calling, you need
to install the microphone
@.
Cautions
• Keep the microphone away from extremely high
temperatures and humidity.
• It is extremely dangerous if the cord becomes wound
around the steering column or gearstick. Be sure to
keep it and other parts from obstructing your driving.
• If airbags or any other shock-absorbing equipment is in
your car, contact the store where you purchased this
unit, or the car dealer, before installation.
m-A
Installing on the sun visor
1
Install the microphone
0
on the clip
0.
2
Install the clip
0
on the sun visor.
3
Install clips (not supplied) and adjust the length
and position of the cord so that it does not
obstruct your driving.
) 0
OM
0
0
TN T
T
) 0
T
0
0
0
N
M
'-
OM
OT
ON
m-B
Installing on the dashboard
1
Install the microphone
0
on the clip
0,
then
place the cord along the groove of the clip
0.
2
Attach the clip
0
to the dashboard with the
double-sided tape
G.
3
Install a clip (not supplied) and adjust the length
and position of the cord so that it does not
obstruct your driving.
Notes
• Before attaching the double-sided tape
G,
clean the surface of the
dashboard with a dry cloth.
• Adjust the microphone angle
to
the proper position.
• The microphone
0
can be installed without using the clip
0.
In this case, directly attach the microphone to the dashboard with the
double-sided tape
G.
Keep the unused clip
0
for future use.
Be sure to set the Auto Off function. For details, refer to
the supplied "Operating Instructions."
The unit will shut off completely and automatically in the
set time when no source is selected, which prevents
battery drainage.
If you do not set the Auto Off function, press and hold
(SOURCE/OFF)
until the display disappears each time
you turn the ignition off.
Reset button
When the installation and connections are completed, be
sure to press the reset button with a ballpoint pen, etc.
~
/V-----
1'---'
l,.?
@
11 ' - - - - - - - - - - - '