Radio; Listening To The Radio; Reception Controls - Sony XAV-62BT Operating Instructions Manual

Radio
listening to the radio
1
Touch "Source List," then "Tuner."
(For XAV-62BT only: From the top menu,
touch "AV Source," then "Tuner.")
The radio reception display appears, and the
preset list is displayed automatically.
2
Touch "Band."
The band list appears.
3
Touch the desired band ("FM1," "FM2,"
"FM3," "AM1," or "AM2").
Touch "Band" again to close the band list.
4
Perform tuning.
To tune automatically
Touch .........
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
To tune manually
Touch ...... repeatedly until the desired
frequency is received.
To skip frequencies continuously, touch and
hold .......
o
"Source List"
Touch to open the source list. (page 13)
e
"ATT"
Touch to attenuate the sound. To cancel,
touch again.
e
"Top"
XAV-62BT •
Touch to open the top menu. (page 13)
XAV-622
Touch to open the source list. (page 13)
o
~/~
Touch to tune manually.
Touch and hold to continuously skip
frequencies.
o
~/~
Touch to tune automatically.
o
"Band"
Touch to open the band list and change
the band.
8
"Receive Menu"
Touch to open the receive menu, which
contains the following items.
• "Mono": Touch to activate monaural
mode if PM reception is poor. To restore
stereo reception, select "OFF."
• "Local": Touch to tune only to stations
with strong signals. To tune normally,
select "OFF."
Q
"Preset List"
Touch to list up stored stations, or store
stations. (page 16)
o
"PTY List"
Touch to open the PTY list. (page 17)
15