Rotary Commander
Default (e)
To use in the factory-set
Changes the operative
position.
direction of rotary commander
Reverse
Any status
controls.
To use on the right side of
the steering column.
Front AUX Input (page 57)
Audio (e)
To activate the AUX input.
Sets whether or not an audio
No source
device's input signals are
OFF
To deactivate the AUX
detected via the front AUX
input.
selected
input.
Rear AUX Input* (page 57)
Video (e)
To display the picture from
Sets the type of device
the connected device.
connected to the rear AUX
terminals to switch the
Audio
To display this unit's
No source
background screen
background screen.
selected
accordingly.
OFF
To deactivate the AUX
input.
No Signal
Through
To display the no signal
Changes the screen
screen.
automatically when no
No source
..
external video signal is
Blank (e)
To display the audio
selected
detected.
playback screen with no
signal notification.
Camera Input
OFF
To deactivate the input.
Activates the video input from
ON
(e)
the connected rear view
To display the picture from
camera.
the rear view camera when
Any status
the back lamp lights up (or
the shift lever is set to the R
(reverse) position).
Rear View Camera Setting
-
(page 59)
Any status
*
When
a
device is connected to AUXIBUS IN, "Sony BUS Input" appears instead of "Rear AUX Input," and only
options "Video" and ''Audio'' are selectable.
50