Sony XAV-62BT Operating Instructions Manual page 67

Av center
Hide thumbs Also See for XAV-62BT:
Table of Contents

Advertisement

>fi.!Jiil' j
There is no picture/picture noise occurs.
o
A connection has not been made correctly.
o
Check the connection to the connected equipment,
and set the input selector of the equipment to the
source corresponding to this unit.
o
The disc is defective or dirty.
o
Installation is not correct.
_ Install the unit at an angle of less than 45° in a
sturdy part of the car.
o
The parking cord (light green) is not connected
to
the
parking brake switch cord, or the parking brake is not
applied.
The picture does not fit in the screen.
The aspect ratio is fixed on the DVD.
There is no picture/picture noise occurs in the
rear monitor.
o
A source/mode which is not connected is selected. If
there is no input, no picture appears in the rear
monitor.
o
The color system setting is incorrect.
-
Set the color system to "PAL" or "NTSC"
according to the connected monitor (page 49).
o
The picture of the rear view camera is displayed on
this unit.
-
No picture appears in the rear monitor if the
picture of the rear view camera is displayed on
this unit.
There is no sound/sound skips/sound cracks.
o
A connection has not been made correctly.
o
Check the connection to the connected equipment,
and set the input selector of the equipment to the
source corresponding to this unit.
o
The disc is defective or dirty.
o
Installation is not correct.
-
Install the unit at an angle of less than 45° in a
sturdy part of the car.
o
The MP3 file sampling rate is not 32, 44.1, or
48 kHz.
o
The WMA file sampling rate is not 32, 44.1, or
48 kHz.
o
The AAC file sampling rate is not 44.1 or 48 kHz.
o
The MP3
fi
Ie bit rate is not 48 to 192 kbps.
o
The WMA file bit rate is not 64 to 192 kbps.
o
The AAC file bit rate is not 40 to 320 kbps.
o
The unit is in pause/reverse/fast-forward mode.
o
The settings for the outputs are not made correctly.
o
The DVD output level is too low (page 21).
o
The volume is too low.
o
The ATT function is activated, or the Telephone ATT
function (when the interface cable of a car telephone
is connected to the ATT lead) is activated.
o
The position of the fader control "Fader" is not set for
a 2-speaker system.
o
The format is not supported (such as DTS).
-
Check if the format is supported by this unit
(page 11).
Sound is noisy.
Keep cords and cables away from each other.
~~i$C~':o~l.'.o.~,;
:
The disc cannot be loaded.
o
Another disc is already loaded.
o
The disc has been forcibly inserted upside down or in
the wrong way.
The disc does not play.
o
The disc is defective or dirty.
o
The disc is not playable.
o
The DVD is not playable due to the region code.
o
The disc is not finalized (page 61).
• The disc format and file version are incompatible
with this unit (page II, 60).
• Press
~
to remove the disc.
MP3IWMAlAAC/JPEGlXvid/MPEG-4 files do not
play.
• Recording was not performed according to the ISO
9660 level I or level 2 format or the Joliet or Romeo
expansion format (DATA CD), or the UDF Bridge
format (DATA DVD) (page 60).
• The file extension is incorrect (page 61).
• Files are not stored in MP3IWMA/AAC/JPEG/Xvidl
MPEG-4 format.
o
If
the disc contains multiple file types, only the
_
selected file type (audio/video/image) can be played.
-
Select the appropriate file type using the list
(page 31).
MP3IWMAlAAC/JPEGlXvidlMPEG·4 files take
longer to play than others.
The following discs take a longer time to start
playback.
- a disc recorded with a complicated tree structure.
- a disc recorded in Multi Session/Multi Border.
- a disc to which data can be added.
The disc does not start playing from the
beginning.
Resume playback or multi-disc resume playback
(page 55) has taken effect.
Certain functions cannot be performed.
Depending on the disc, you may not be able to perform
operations such as stop, search, or repeat/shuffle play.
For details, refer to the manual supplied with the disc.
The soundtrack/subtitle language or angle
cannot be changed.
• Use the DVD menu instead of the direct selection
button on the remote commander (not supplied)
(page 17).
• Multilingual tracks, multilingual subtitles, or multi-
angles are not recorded on the DVD.
• The DVD prohibits changing.
The operation buttons do not function.
The disc will not eject.
Press the reset button (page 14).
You forgot the password for parental control.
Enter "5776" as your password to unlock the
restriction (page 21 ).
continue to next page --
67

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xav-622

Table of Contents