Using The G-Code Feature; G-Code Extended - Samsung DVD-VR350 Instruction Manual

DVD-Recorder
DVD-RAM(VR)
Title List
G-Code
Playlist Scheduled Record List

G-Code Extended

Disc Manager
Programme
Setup
Copy
MOVE OK
DVD-Recorder
DVD-RAM(VR)
Title List
Playlist
Disc Manager
Programme
Setup
Copy
NUMBER
DVD-Recorder
DVD-RAM(VR)
No. To Source Day Start End Speed Edit
To Source
DVD PR 01
Available Time 00:48 SP
MOVE OK
DVD-Recorder
DVD-RAM(VR)
No. To Source Day Start End Speed Edit
01 DVD PR 01
02 - - - - - - - - - - - - -:- -
MOVE OK
DVD-Recorder
DVD-RAM(VR)
Title List
G-Code
Scheduled Record List
Playlist
G-Code Extended
Disc Manager
Programme
Setup
Copy
MOVE OK
DVD-Recorder
DVD-RAM(VR)
Title List
G-Code
Scheduled Record List
Playlist
G-Code Extended
Disc Manager
Programme
Setup
Copy
MOVE OK
Downloaded From Disc-Player.com Samsung Manuals
Programme
►
►
: Off
►
RETURN EXIT
G-Code
Enter G-Code number. [0-9]
OK RETURN EXIT
Scheduled Record List
Current Time 12:00
No. 01
Day Start End Speed
01 SUN 12:00 14:00 SP
RETURN EXIT
Scheduled Record List
Current Time 12:00
►
Daily 12:00 14:00 SP
- -:- - - - ►
RETURN EXIT
Programme
►
►
: Off
►
RETURN EXIT
Programme
►
►
Off
: Off
10
►
20
30
40
50
60
RETURN EXIT

Using the G-Code Feature

Before presetting your DVD Recorder & VCR:
• Switch on both the television and your DVD Recorder & VCR.
• Check that the date and time are correct.
Up to twelve programmes can be preset.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Programme, then press the OK or ► button.
3. Press the ▲▼ buttons to select G-Code, then press the OK or ► button.
• A message is displayed to allow you to enter the G-Code code.
4. Press the number buttons to enter the code of the programme that you
want to record in your television magazine.
• If you want to correct the G-Code code that you are entering:
• Press the ◄ button until the digit to be corrected is cleared.
• Enter the correct digit.
5. Press the OK button.
• The information concerning the programme is displayed.
• When using the G-Code function for the fi rst time with stored stations,
the programme number fl ashes. This one time, you must enter the
PR number manually by pressing the ▲▼ buttons.
6. If the programme and times are correct, press the OK button.
7. Turn the power off by pressing the STANDBY/ON button to activate
the timer recoding setting.
8. Refer to pages 54~55 if you want to:
• Check whether the timer Recording has set correctly or not.
• Cancel a preset recording.
■ The numbers next to each TV programme listing in the
magazines or newspapers are G-Code code numbers, which
allow you to programme your DVD Recorder & VCR instantly
with the remote control.
■ G-Code is a trademark of Gemstar Development Corporation.
The G-Code system is manufactured under licence from Gemstar
Development Corporation.
G-Code Extended
To prevent delays or over-runs the DVD Recorder & VCR has a
function called G-Code Extended allowing you to extended the
recording time by up to 60 minutes.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Programme, then press the OK or ► button.
3. Press the ▲▼ buttons to select G-Code Extended, then press the OK
or ► button.
4. Press the ▲▼ buttons to select the G-Code Extended time, then the
press OK or ► button.
5. Press the EXIT button to exit the menu.
English - 57
DVD-VR355 only