How To Operate Your Dishwasher; Dial Cycles - GE GSD1150 Use And Care Manual

HOW TO OPERATE YOUR DISHWASHER

Your dishwasher is designed to give maximum
performance on loads with normal and heavy soils.
You may find that many of your dishes have lighter
soils than normal; if this is the case you can save
water and energy by selecting a cycle other than
NORMAL WASH.
NOTE: The lights over the Cycle and Energy Option
pads come ON to indicate the cycle/option that has
been selected. Press pad firmly until the light comes
on. These Cycle and Energy Option Indicator lights
remain on while the door is latched.
The CYCLE ON light will come on when the
dishwasher is in a Start Delay, Wash or Dry cycle.
The light will go out when all cycles are complete.
If dishwasher drains into a food waste disposal,
operate the disposal until it is empty before starting
dishwasher.
1.
Load your dishwasher. (See Loading section.)
the OFF position and the CYCLE ON light is off,
indicating all cycles are complete.
and casseroles with dried-on or baked-on soils.
Everyday dishes may be included. This cycle will
get heavily soiled dishes cleaner than the normal
cycle. It will not remove burned-on foods.
NORMAL WASH—For most loads of everyday
dishes, glasses and cookware with medium soils.
Designed to yield high performance on normal soils.
LIGHT WASH—For loads that have dishes with
light soils.
WATER SAVER—For dishes with 1 ight soils. This
cycle saves water by using 30Yo less water than the
NORMAL WASH cycle.
best performance with heavily-soiled dishes.
When selected, the wash cycle is extended while
the dishwasher heats the water for the best washing
HEATED DRY—Turns the drying heater on for
fast drying. When selected, the cycle time will be
extended for 32 minutes.
4
Cycles
HEATED DRY off—Shuts off the heating unit,
thus saving energy. Dishes air-dry naturally. It takes
longer but saves energy. You can open the door after
the motor stops to speed drying. Excellent for
overnight drying.
OPTIONS RESET—Turns all Energy Options off.
Turn the Cycle Indicator Dial to START
or to the desired START DELAY time.
Turning the dial to START wil 1 begin the cycle
immediately, To obtain the benefits of a complete
cycle, be careful that you do not turn the dial any
farther than is necessary to start the dishwasher.
There is a time delay between start-up and water
The START DELAY will allow you to delay the
start time of your dishwasher automatically for up
to 6 hours. Turn the Cycle Indicator Dial to the
desired time. The CYCLE ON light will come on.

Dial Cycles

The SHORT WASH cycle allows you to quickly
wash loads of everyday dishes with medium soils
that have not dried on, such as loads consisting mostly
of glasses.
Select the NORMAL WASH cycle and any
Energy Option if desired.
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
SHORT WASH.
d. Latch the door to start the cycle.
Energy Opt;ons J