Dial Cycles; Cycle Selection Chart - GE GSD950 Use And Care Manual

Dial Cycles

The RINSE & HOLD cycle is for rinsing
partial loads which will be washed later. Do not
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
RINSE & HOLD.
d. Latch the door to start the cycle.

Cycle Selection Chart

Gallons
POTSCRUBBER 10.6
NORMAL WASH
LIGHT WASH 7.9
WATER SAVER
RINSE & HOLD
Drying options:
HEATED DRY on, Availahle on all wash cycles except RINSE& HOLD. Add
Wash cycle
Time
Minutes
72
35
The PLATE WARMER cycle (on some models)
is for warming clean dishes and serving plates for
the serving of hot foods. The cycle will take
approximately 35 minutes if selected.
a. Load clean plates and dishes to be warmed.
b. Select HEATED DRY.
c. Be sure the door is unlatched.
d. Slowly turn the Cycle Indicator dial to
PLATE WARMER.
e. Latch the door to start the cycle.
Cycle Sequence
minutes to wash cycle time.
5