Rinse & Hold; Cycle Selection Chart - GE GSD1205 Use And Care Manual

Quiet Mwf
Dial Cycles
(continued)
The RINSE & HOLD cycle is for rinsing
partial loads which will be washed later.
Do not use detergent.
a. Mke sure ENERGY SAVER is selected.
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
RINSE & HOLD.
d. Latch the door to start the cycle.
The PLATE WA~ER cycle is for warming clean
dishes and servingplates for the serving of hot foods.
The cycle will t~e approximately32 minutes if
selected.
a. Load clean plates and dishes to be warmed.
b. Select HEATED DRY.
c. Be sure the door is unlatched.
d. Slowly turn the Cycle Indicator Dial to
PLATE WA~ER.
e. Latch the door to start the cycle.
Cycle Selection Chart
Wash Cycle
WaterUse Time
Gatlons Minutes
WashCycles (approx.) (approx.) CycleSequence
POTSCRUBBER 10.6 72
mmmmmBB
NORMALWASH 9.1
51*
mmmBmm
WATERSAVER 6.4
51*
BEmm
DELICATEWASH 8.1
51*
mmmmmm
SHORT WASH 7.4 43*
Mmmmm
RINSE & HOLD
3.0 12
mm
.——. . — ----— ,.,
*Unextended times.
Thesecycletimeswill k increasedapproximately21 mmutesd
'IEMP BUOS 1
optlmrISselected.
D~ingOptions:
HEATEDDRY.Availableon all washcyclesexceptRINSE& HOLD.Add 32 minutesto wash cycletime.
ENERGYSAVER.Dryingheateris turnedoff. Dishesdry naturally.