Kodak DC5000 User Manual page 85

Camera
Problem
Pictures remaining number
does not decrease after taking
a picture.
Picture is not clear.
Picture is tinted green, blue, or
red-orange.
Cause
The image Resolution
and Quality settings
does not take up
sufficient space to
decrease the picture
remaining number.
The lens is dirty.
Subject too close
when taking picture.
Subject or the camera
moved while the
picture was taken.
The subject is too far
away for the flash to
be effective.
The Sharpness setting
may be set incorrectly.
The White Balance
setting is set
incorrectly.
Solution
The camera is
operating normally.
Continue taking
pictures.
Clean the lens. See
page 89.
Stand at least .82 ft
(.25m) in wide angle,
1.6 ft (.5m) in
telephoto.
Hold camera steady
until the picture is
taken.
Move so the subject is
less than 13 ft
(4.0 m) away.
Change the Sharpness
setting to Standard.
See page 30.
Change the White
Balance setting to
Auto. See page 27.
Check the White
Balance default
setting. See page 51.
77
8