Kodak DC5000 User Manual page 82

Camera
Problem
SHUTTER button does not
work.
Camera does not turn on.
74
Cause
Camera is not turned
on.
Mode dial is not set to
Capture.
Ready light is
blinking. Camera is
processing picture.
The Status Display
reads Full. The
camera memory card
is full.
Batteries are not
properly installed.
Batteries are low or
dead.
Solution
Turn on the camera.
See page 2.
Set the Mode dial to
Capture.
Wait until Ready light
stops blinking before
attempting to take
another picture.
Transfer pictures to
your computer, delete
pictures on the card
(see page 39), or insert
a card with available
memory
(see page 5).
Remove and reinstall
the batteries. See page
2.
Batteries need to be
replaced (see page 2),
or recharged (see page
3). Also, you could
use an AC adapter.