To Fit The Plate Rack - Belling ELECTRIC RANGE Users Manual & Installation Handbook

USING THE PLATE RACK (IF SUPPLIED)

To fit the plate rack:

• Pull the shelf out of the cavity.
• Tilt the plate warmer towards you
and make sure that it hooks under-
neath the shelf bars at the front.
• Drop the plate warmer carefully into
position.
The plate warmer is now secure and you
can place your plates into it.
Always make sure that you use oven
gloves if you are putting the plate warmer
into a hot, or recently used oven to pre-
vent burns.
Always make sure that your plates are
suitable for warming - some plates may
shatter or crack when exposed to heat.
We recommend that you heat the oven to
70°C, or below, if you are warming plates.
Plate warmer
FRONT OF SHELF
REAR OF SHELF