Camera Ready Light Status - Kodak EasyShare CX7220 User Manual

Troubleshooting

Camera ready light status

Ready light
Status
Ready light glows
steady green.
Ready light blinks
green.
Ready light blinks
amber.
Ready light glows
steady red.
Ready light blinks red
and camera turns off.
Still having problems?
Visit www.kodak.com/go/cx7220support, or see
39
Cause/solution
Camera is on; ready to take a picture or video.
Shutter button is pressed halfway down. Focus and exposure
are set.
Picture is being processed and saved to the camera.
Pictures are being transferred to computer, camera is
connected.
Camera firmware upgrade is in process.
Flash is not charged. Wait. Resume picture taking when the
light stops blinking and glows steady green.
Auto exposure or auto focus are not locked. Release the
Shutter button and recompose the picture.
Camera's internal memory or card is full.
Transfer pictures to the computer
from the camera (page
(page 15), or insert a card with available memory
Camera is processing. Wait. Resume picture taking when the
light turns green.
Card is read-only. Change storage location to internal memory
(page 15), or use a different card.
Camera DRAM is full and video recording is stopped.
Recording resumes using internal memory or SD/MMC card.
Insert new batteries. If using rechargeable batteries, charge
before inserting (page 2
(page 32), delete pictures
21), switch storage locations
and page 3).
Chapter 8, Getting
(page 7).
help.