Camera Ready Light Status - Kodak EasyShare C653 User Manual

If...
Picture is too dark.
Camera does not
recognize
SD/MMC card.
Camera freezes up
when a card is
inserted or
removed.
Memory card full.
Memory card and
internal memory
full.

Camera ready light status

If...
Ready light does
not turn on and the
camera does not
work.
www.kodak.com/go/support
Try one or more the following
I
Turn on the flash
I
Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.
I
Use Fill flash (see page
behind the subject.
I
Increase Exposure Compensation
I
Purchase a certified SD/MMC card.
I
Reformat the card
Caution: Formatting a card deletes all pictures and videos,
including protected files.
I
Insert a card into the slot, then push to seat
I
Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
I
Insert a new card
(page 29), or delete pictures
I
Transfer pictures to the computer
internal memory
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Try one or more of the following
I
Turn on the camera
I
Install new batteries
I
Turn camera off, then back on.
(page 11).
11) or change your position so light is not
(page
(see page 39).
(page 3), transfer pictures to the computer
(page 19).
(page
(see page 39).
(page 2).
(page 1) or charge rechargeable batteries.
Troubleshooting
14).
(page 3).
29), then format the card or
49