Camera Ready Light Status - Kodak EasyShare C300 User Manual

Downloaded From camera-usermanual.com Kodak Manuals
Message Cause
Unrecognized file Camera cannot read the
format picture format.
Camera error #XXXX. An error is detected.
See user's guide.

Camera ready light status

Status Cause
Ready light does not Camera is not turned on. Turn on the camera
turn on and the
Batteries are exhausted
camera does not
or are not charged.
work.
Mode dial was on when
batteries were reloaded.
Ready light blinks Picture is being
green. processed and saved to
the camera.
Ready light blinks Flash is not charged.
amber.
Camera is initializing.
Ready light blinks red Batteries are low or
and camera turns off. exhausted.
www.kodak.com/go/support
Troubleshooting
Solution
Transfer the picture to the
computer (page 15), or delete it
(page 12).
Turn the Mode dial off, then back
on. If the message reappears,
contact Customer Support
(page 43).
Solution
(page 2).
Install new batteries (page 1) or
charge rechargeable batteries.
Turn Mode dial off, then back on.
Camera is operating normally.
Wait. Resume picture taking when
the light stops blinking and turns
green.
Install new batteries (page 1) or
charge rechargeable batteries.
41