Displaying Pictures And Videos On A Television; Copying Pictures And Videos - Kodak EasyShare CX7220 User Manual

Reviewing pictures and videos
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can
increase the display interval to up to 60 seconds.
1 On the Slide Show menu, press
OK button.
2 Select a display interval. To scroll through the seconds quickly, press and
hold .
3 Press the OK button.
This setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, press
button.
2 Highlight On, then press the OK button.
The next time you run a slide show, it repeats until you press the OK button or
until battery power is exhausted. This setting remains until you change it.

Displaying pictures and videos on a television

You can display pictures and videos on a television, computer monitor, or any
device equipped with a video input using a compatible Kodak EasyShare
printer dock and an optional audio/video (A/V) cable. See the printer dock
user's guide for details. (Image quality on a television screen may not be as
good as on a computer monitor or when printed.)
Purchase these and other accessories at a dealer of Kodak products, or visit
www.kodak.com/go/cx7220accessories.

Copying pictures and videos

You can copy pictures and videos from a card to internal memory or from
internal memory to a card.
Before you copy, make sure that:
■ A card is inserted in the camera.
■ The camera's image storage location is set to the location from which you
are copying. See
25
page 15.
to highlight Interval, then press the
to highlight Loop, then press the OK