1.SVC mode data Adjustment
NOTE!! When the EEPROM has been replaced, the SVC data should be restored as the
function of individual system and specification.
When the EEPROM has been replaced White Blance Checking.
[ Enter and exit SVC mode ]
Note: into the SVC mode, Initialize with default data.
1) Press 5 Seconds MENU buttons on both TV set and Remote Controller at the same
time to get into SVC mode.
2) Press the PR
3) Input the corresponding SVC data referring to Table below with the VOL
4) Press TV/AV button to exit SVC mode
1-1. Factory outgoing setting & Initialize with default data (into the SVC mode)]
Waring: Do not change the "( )" item...
SERVICE MANUAL
ADJUSTMENT INSTRUCTION
WITH DEFAULT FACTORY DATA
button several times to find SVC Data.
, key.