If the problem persists, try to move the unit closer to this current unit (adjacent
plugs on the same wall socket is most preferable). If the problem still persists
and that unit is still not shown on the network, then the unit might be defective
please contact technical support. Otherwise if you view the unit working, distance
might be the only issue.
3.2 Privacy
Setting Up Security on a Local Powerline device
The Privacy tab will allow you to change the Network Password to the unit that
is currently connected to this computer. This network password encrypts all data
that is sent from this unit using 56-bit data encryption standard (DES).
**Note** Every unit on your home network MUST have the same Network
Password for connectivity to be established throughout your home. The default
network password is "HomePlug".
14