Planet Networking & Communication pl-201v2-eu User Manual page 13

**Note** If you do not see ANY unit in the device status but the Powerline device
does exist, try to unplug all devices and plug them back. Meanwhile, please
make sure the cable is the right type and working correctly. If all seems to be
correct, and you still receive nothing in the Device window, try rebooting your
computer.
Part 2: Detect the Network Powerline device
The Main tab shows all the other Powerline units on your home network. It will
represent them by MAC Address, and will also show the available bandwidth to
each unit (Units farther away from another Powerline device might have a lower
Data Rate). If you add or remove units from your home network, click the "Scan"
button to re-scan the network, and refresh with any changes.
**Note** Only units with the same Network Password will be shown, (Password
case sensitive).
**Note** If a unit shows MAC Address of all 0's, this unit might not have a solid
connection, or might not connect at all.
**Note** If there are units in the home network, but nothing displays in this
Network scan, try to unplug all devices, and plug them back (Only do this with the
units that you do not view in the network screen, you don't have to do this with all
units.)
13