Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Conrad PL200D
Summary of Contents for Conrad PL200D
- Page 1 Conrad Powerline Adapter PL200D...
- Page 2 While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. The manufacturer shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from the manufacturer.
-
Page 3: Table Of Contents
1.1.1 Powerline Adapter PL200D........4 Practical examples. -
Page 4: Introduction
• Connect the adapter via the network cable to the computer or the respective network device. • Connect the adapter to the electrical wiring • As an option: for individual password allocation simply press the encryption button or install the configuration software on your computer • That's it! Conrad Powerline Adapter PL200D... -
Page 5: Practical Examples
Introduction 5 Practical examples 1.2.1 Internet solution for single users with Internet connection via a modem (network port) modem 1.2.2 Internet solution for multi-users with Internet connection via a modem router modem router Conrad Powerline Adapter PL200D... -
Page 6: Installation
The adapter is fitted with 3 control lamps (LEDs) as well as a network con- nection and an encryption button. LEDs Powerline Adapter PL200D green Lit steady when the Powerline Adapter PL200D is ready for Power operation; flashes when the Powerline Adapter PL200D is in standby mode. green The network connection is suitable for HD video streaming;... -
Page 7: Connecting The Adapter
Plug the adapter into a free electrical outlet. In order to connect multiple HomePlug devices into a self-contained, secure network, now continue with the installation of the configuration. For more information, refer to the chapter 'Configuring the HomePlug network'. Conrad Powerline Adapter PL200D... -
Page 8: Configuring The Homeplug Network
Adapters cannot be configured while in Standby mode. The following section contains exact instructions on the basis of possible net- work scenarios: Encrypting a new Powerline Adapter PL200D network consisting of two adapters If the adapters are still in their factory default states, press the encryption but- tons on both adapters for at least ten seconds, until the Power LED goes out and starts to flash. -
Page 9: Encrypting The Homeplug Network Via The Configuration Software
PL200D, first press the encryption button of one of your network’s existing adapters (< 1 second), then press the encryption button of your new Power- line Adapter PL200D (< 1 second) within two minutes. That's it! The new Powerline Adapter PL200D is now integrated in your network. - Page 10 The factory default password is "HomePlug". For security reasons, we re- commend overwriting it and assigning a password of your own. • Add further adapters Connect each adapter, which is to be added to your network, to your com- puter and assign it a password. Conrad Powerline Adapter PL200D...
-
Page 11: Appendix
Rated frequency: 50 Hz Environment Humidity (non-condensing): 10-90% Storage: -25°C – 70°C Operation: 0°C – 40°C System requirements Ethernet interface Windows XP (32 bit), Windows Vista or any other opera- ting system with network support Warranty 2 years Conrad Powerline Adapter PL200D... -
Page 12: Important Safety Instructions
• device. the device has been exposed to rain or water. • the device does not work, even though the operating instructions • have been followed properly. the device’s case is damaged. • Conrad Powerline Adapter PL200D... -
Page 13: Warranty Conditions
Conrad Powerline Adapter PL200D... - Page 14 The law of the Federal Republic of Germany is applicable. The UN commercial law does not apply to dealings between the manufacturer and the purchaser. Conrad Powerline Adapter PL200D...