Important Safety Instructions - Conrad PL200D User Manual

12 Appendix
4.2

Important safety instructions

All safety and operating instructions should be read and understood before
using the device, and should be kept for future reference.
• Never open the device. There are no user-serviceable parts inside the
Do not try to service this product yourself! Contact qualified technicians each
and every time your device needs maintenance. There is a risk of electric
shock!
• Use the device in a dry location only.
• Always use the included network cable to connect the device.
• Do not insert any objects into the openings of the device.
• To disconnect the device from the power supply grid, pull the power plug.
• Do not keep the device in direct sunlight.
• Slots and openings on the case serve as ventilation. Never block or cover
• Never set up the device near a heater or radiator.
• The device should be located only where sufficient ventilation can be ensu-
• Disconnect the device from the power supply grid before cleaning. Use a
• Never use the device with a power supply that does not meet the specifica-
• In the event of damage, disconnect the device from the power supply grid
Conrad Powerline Adapter PL200D
device.
them.
red.
moist towel to clean the device. Never use water, paint thinner, benzene,
alcohol or other strong cleaning agents when cleaning the device, as these
could damage the case.
tions provided on the rating plate. If you do not know what type of power
supply you have at home, contact your dealer or energy supplier.
and contact customer service. This applies, for example, if
the power cable or plug is damaged.
•
liquid has been spilled on the device or objects have fallen into the
•
device.
the device has been exposed to rain or water.
•
the device does not work, even though the operating instructions
•
have been followed properly.
the device's case is damaged.
•