Connecting The Adapter - Conrad PL200D User Manual

• Ethernet connection
• Encryption button
Please note that all adapters which are connected to the electrical wiring,
switch to energy-saving mode after approx. 20 minutes, if no active network
device is connected to the Ethernet port. In energy-saving mode, the adapter
cannot be accessed via the electrical wiring.
2.4

Connecting the adapter

In order to connect multiple HomePlug devices into a self-contained, secure
network, now continue with the installation of the configuration. For more
information, refer to the chapter 'Configuring the HomePlug network'.
LEDs
orange
red
Ethernet
This is the connection point on the addapter for connecting it to a computer
or another network device with the network cable (included).
Data encryption at the touch of a button; For more information on the func-
tions of the encryption button, please see the chapter 'Configuring the
HomePlug network'.
Use the included network cable to connect the adapter to the network
port of your running computer.
Plug the adapter into a free electrical outlet.
Powerline Adapter PL200D
The network connection is suitable for SD video streaming and
online gaming; flashes when data is being transmitted.
The network connection is suitable for simple data transfer and
Internet access; flashes when data is being transmitted.
A 100 Mbps or 10 Mbps connection to the Ethernet network
exists; flashes when data is being transmitted.
Conrad Powerline Adapter PL200D
Installation 7