Updating The Software - Canon Networked Multi-Projection Set Up And Instructions Manual

Installation
5
If a [User Account Control] message is displayed, click [Yes].
6
Next, follow the instructions displayed to complete the installation
process.
• Confirmation or warning messages may be displayed during installation or
uninstallation.
These messages request administrator credentials from the current user. If you are
logged in as a user with administrator credentials, click [Yes] (or [Continue]) to
continue.
• Depending on the software, you may not be able to continue without administrator
credentials. If you are logged in as a standard user, switch to an administrator account
and try again.
• You may need to restart the computer to complete the installation process. If restarting
is requested, be sure to restart the computer.
• The software cannot be installed when the following setting is used in Windows 8.1.
Control Panel > All Control Panel Items > Display > "Let me choose one scaling level
for all my displays" selected > "Extra Large - 200%" selected.
Install the software using a setting other than "Extra Large - 200%."

■ Updating the Software

If the version of the software installed is older than a version available on a
projector, you can update it by following the normal installation procedure.
During the installation process, the version available is compared to the version
installed, and if it is newer, the current version is overwritten as the new version is
installed. If overwriting is not necessary, the installation process ends.
Software Versions
The version of the software stored on the projector's internal memory is 1.1.
• Any projectors purchased previously may have been shipped with version 1.0 of the
software stored internally.
• The software will automatically detect if a newer version of the software is available on
a projector. In this case, a message is displayed to notify you.
14