Canon Networked Multi-Projection Set Up And Instructions Manual page 32

Using the Projector in Meeting Mode
• If you choose to set a session password, other users must enter that password to join
the session. To set a password, click [Set] and enter the password.
• In the backward compatibility setting, specify session compatibility.
Although specifying [ON] enables projectors or computers running NMPJ V1.0 to join
the session, some features (such as voice functions and PbyP) will not be available.
Specifying [OFF] will restrict session compatibility and available functions to those of
the projector selected when the session was created.
In this case, when only projectors compatible with NMPJ V1.1 are selected, projectors
or computers running NMPJ V1.0 cannot join the session, but all NMPJ V1.1 functions
will be available.
Otherwise, if some projectors running NMPJ V1.0 are included, projectors or
computers running NMPJ V1.0 can join the session, but features such as voice
functions and PbyP will not be available.
• Desktop selection is only available with computers that have dual monitor support.
6
The Meeting Mode window is displayed. Select a projector to control from
the pull-down list.
7
In the list at right, select a computer to use with your designated
projector. Drag the computer to a desired position in the layout area.
You can arrange up to four computers as desired in the layout area.
32