Feature Descriptions - Code Alarm ca5554 Professional series Installation Manual

Feature Descriptions
Feature Bank 2 - Security
1 - Silent Choice: Controls the normal arm/disarm chirps of the security system.
ON - Silent arming/disarming upon first press of lock/unlock, pressing lock/
unlock a second time will activate the arm/disarm chirps respectively. The
system will only sound the arm/disarm chirps upon a second press of the
lock/unlock buttons.
OFF - normal arm/disarm chirps upon the first press of lock/unlock.
2 - Passive Locks: Determines manual or automatic locking of the vehicle's doors.
Active - Requires use of the transmitter to lock the vehicle's doors.
Passive -Automatically locks the vehicle's doors 1 minute after the last door
is closed. Note: For Passive Locks, feature #3 Passive Arming must also be
set to passive
3 - Passive Arming: Determines manual or automatic locking of the vehicle's doors.
Active- Requires use of the transmitter to arm the security system.
Passive -Automatically arms the security system 1 minute after the last door
is closed.
4 - 8 Not available on this model.
9 -
OBI
Port Protocol: Determines the protocol type in which the
OBI
port uses to
interface with external modules.
OBI
Protocol
ADS Protocol
10 - Not available on this model.
11 - L.E.D. Output when Armed: Control of the LED when the system is armed I
locked.
ON - LED will flash when system is armed I locked
OFF- LED will not flash when system is armed
I
locked. Only applies to
normal operation (armed/locked) and does not affect programming, valet
mode, diagnostics, passive lock countdown or PTN.
2014 Voxx Electronics Corporation. All rights reserved. 21