Chirp Delete - User Accessible; User Selectable Led; Feature Descriptions - Code Alarm PROFESSIONAL Series Installation Manual

Chirp Delete - User Accessible

System ARM/DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.
1. Turn the ignition ON then OFF.
2. Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.

User Selectable LED

This feature will control whether the LED is ON or OFF when the system is Armed/
Locked. This will be selectable in feature programming OR on-the-fly without entering
the programming feature banks.
1. Turn the ignition ON, OFF, ON, OFF.
2. Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.

Feature Descriptions

Feature Bank 2 - Security
1 - Silent Choice: Controls the normal arm/disarm chirps of the security system.
ON - Silent arming/disarming upon first press of lock/unlock, pressing lock/
unlock a second time will activate the arm/disarm chirps respectively. The
system will only sound the arm/disarm chirps upon a second press of the
lock/unlock buttons.
OFF - normal arm/disarm chirps upon the first press of lock/unlock.
2 - Door Locks: Determines manual or automatic locking of the vehicle's doors.
Active - Requires use of the transmitter to lock the vehicle's doors.
Passive - Automatically locks the vehicle's doors 1 minute after the last door
is closed.
Note: For Passive Locks, feature #3, System Arming, must also be
set to passive.
3 - System Arming: Determines manual or automatic locking of the vehicle's doors.
Active - Requires use of the transmitter to arm the security system.
Passive - Automatically arms the security system 1 minute after the last
door is closed
2020 Voxx Electronics Corporation. All rights reserved.
17