Table of Contents
Advertisement
Using the
Remote Control
The IR Remote Control RC-3 allows remote
camera operation up to 20 ft (6.1 m) away.
1. Place the camera on a tripod (
[24]) or on another firm support.
SOCKET
2. Press the
ENTER BUTTON
until "REMOTE READY" appears on the
-
TEXT
MESSAGING PANEL
3. Arrange the camera and subject positions
and compose your picture.
4. Point the
REMOTE
the camera and press the remote button.
The
-
REMOTE
CONTROL LAMP
the shutter releases after approximately
3 seconds.
• After you take the picture, the remote
control is canceled.
20
TRIPOD
(22) repeatedly
(30).
(8) toward the front of
(7) blinks and
Changing the remote-control battery
The remote control uses a 3-volt lithium
KODAK KCR2032 (or equivalent) Battery.
Replace the battery
when the remote-
control button does not
release the shutter.
1. Remove the three
screws on the back
of the remote-
control cover.
2. Lift cover and remove
the old battery.
3. Insert a new battery
(+ side up).
4. Replace cover
and re-attach
the screws.
Advertisement
Table of Contents
