Table of Contents
Advertisement
4. Press the select button to activate a
"blinking letter." Press the zoom-dial to the
right or left to increase or decrease the
letter or number.
5. Repress the select button to store the
information and move to the next blinking
position. Repeat steps 4 and 5 until the last
letter in the title is displayed.
• To create a space between words in the
title, use the character (space) before the
letter A.
6. Press the
ENTER BUTTON
the selection.
• After you set the title, the text-messaging
panel will display "PRINT TITLE IS"
followed by the selected title.
Selecting roll titles
You can choose a roll title from either the pre-
selected titles or the saved titles stored in the
camera for the entire roll of film. Both the roll
and print titles will be imprinted on the back of
the print.
24
(22) to complete
1. Press the
TITLE BUTTON
-
TEXT
MESSAGING PANEL
ROLL TITLE ."
2. Press the
SELECT BUTTON
messaging panel will display "NONE."
3. Press the
-
ZOOM
"TITLE LIBRARY" or " SAVED TITLES"
appears on the text-messaging panel.
4. Press the select button to activate the
"blinking" title. Use the zoom-dial lever or the
select button to scroll through the choices
(see Quick-Reference Guide for a
complete list of the titles).
5. Press the
ENTER BUTTON
selected title.
• After you set the title, the text-messaging
panel will display "ROLL TITLE IS"
followed by the selected title.
• The roll title will cancel when the film is
fully exposed.
(20) twice until the
(30) displays " SET
(23). The text-
(15) until
DIAL LEVER
(22) to store the
Advertisement
Table of Contents
