Control Panel - Konica Minolta bizhub C280 User Manual

2.1 Printer controller
2.1.3

Control panel

The printer driver settings are mainly configured on the computer. However, printing the font list and config-
uring the printer controller settings and default print settings are available using the control panel of this ma-
chine.
The following describes the important keys used for the printer function.
No.
1
2
3
4
5
6
7
8
bizhub C360/C280/C220
Downloaded From ManualsPrinter.com Manuals
12
11
10
9
Name
Touch Panel
Utility/Counter
Reset
Proof Copy
Start
Data Indicator
C (clear)
Keypad
1
8 7 6 5 4
Description
Various screens and messages are displayed.
Configure various settings by directly pressing the touch
panel.
Press this key to display the [Utility] screen and the Meter
Count screen.
Press this key to reset all settings (except programmed set-
tings) entered using the control panel or touch panel.
Press this key to perform proof printing when a proof print job
is stored.
Press this key to start the operation of the selected function.
When this machine is ready to begin the operation, the indi-
cator on the Start key lights up in blue. If the indicator on the
Start key lights up in orange, the operation cannot begin.
Flashes in blue while a print job or fax is being received.
Lights up in blue when a print job or fax is queued to be print-
ed or while it is being printed.
Press this key to erase a value entered using the keypad or
characters entered from the keyboard on the screen.
Press to enter numbers. Use the keypad to enter the admin-
istrator password or other setting values.
2
2
3
2-4