Konica Minolta bizhub C280 User Manual page 71

6.1 Mac OS X 10.2/10.3/10.4/10.5
Adding a printer
1
2
3
4
5
6
bizhub C360/C280/C220
Downloaded From ManualsPrinter.com Manuals
In the [Apple Menu], select [System Preferences...].
Click the [Print & Fax] icon.
Click [+] on the [Print & Fax] window.
Click [Default].
Connected printers are detected.
% If no printer is detected, turn this machine off, then on again.
In this case, turn off this machine, and then wait approximately 10 seconds before turning it on
again. If you turn the printer on immediately after turning it off, it may not function correctly.
From the [Printer Name] list, select the desired AppleTalk-connected model name.
The printer driver corresponding to the selected printer name is automatically selected.
% After the printer driver is selected, go to Step 7.
% If an incorrect printer driver is selected, go to Step 6.
Select the desired printer driver manually.
% When OS X 10.5 is used, select the [Select a driver to use...] from the [Print Using:], and then select
the printer driver of the desired model name from the list.
% When OS X 10.4 is used, select [KONICA MINOLTA] from the [Print Using:], and then select the
printer driver of the desired model name from the list.
6
6-5