Photo Stickers - Canon PIXMA iP90 Quick Start Manual

About Image Data Format for Printing
This printer can handle only Exif/JPEG and PNG image data to produce photos.
About "Paper Size" and "Paper Type"
To change the paper size or paper type, operate your device to select the PictBridge
print setup mode and confirm or change the settings.
By default, 4"×6" is selected in "Paper Size" and "Photo"(Photo Paper Plus Glossy)
is selected in "Paper Type" for this printer. To use Photo Paper Pro, select "Fast
Photo" in "Paper type".
The following sizes and types of paper can be loaded in the printer by selecting
options in "Paper Size" and "Paper Type".
"Paper Size" setting
4"×6" (Default)
5"×7" *1
Credit Card
8.5"×11" (Letter)*3
*1 This size can be selected only for Canon PictBridge compatible cameras (Note that it cannot be selected for
some models).
*2 This paper is exclusively used to print photo stickers. When printing on sticker paper, select "4"x6"" in "Paper
Size."
*3 When you selected "8.5"x 11"(Letter)" in "Paper Size", you can select "Plain Paper" in "Paper Type". When you
selected "Plain Paper" in "Paper Type", bordered printing will be performed even if you select "Borderless" in
"Layout".
About "Layout" and "Trimming"
By default, "Borderless" is selected in "Layout" and "Off (No trimming)" is selected
in "Trimming" for this printer.
Note
Downloaded from ManualsPrinter.com Manuals
"Paper Type" setting Paper loaded in printer
Photo (Default)
Fast Photo
Photo
Photo
Photo
Fast Photo
When you using Photo Stickers (PS-101), do not set "Borderless
Printing" in Layout setting.
Advanced Printing
Photo Paper Plus Glossy
Photo Paper Plus Semi-Gloss
Glossy Photo Paper

Photo Stickers*2

Photo Paper Pro
Photo Paper Plus Glossy
Glossy Photo Paper
Photo Paper Plus Glossy
Photo Paper Plus Semi-Gloss
Glossy Photo Paper
Photo Paper Pro
27